Pneumatic valves are likely the last component to be specified in a pneumatic system. To establish valve specifications, the desired application parameters such as load/force, speed, & special application needs will have likely already resulted in cylinder(s) sizing and selection downstream of the valves. The condition of the compressed air & the cylinder selection will have largely driven the air prep selection that is placed before the valve. What’s left is perhaps the most critical for performance…the control valve selection and sizing.Customers drive the control valve specification. With a multitude of valve types available, there are a variety of functions and options to consider. While this can be quite a challenge, here are the 2 basic steps outlining valve selection. It’s not as simple as just 2 steps, of course, but considering these basics will get you within sight of the final valve specification.
What is the number of ports needed?
Typically 3, 4, or 5 ports are available.
What is the number of valve positions needed?Typically 2 or 3 valve ‘positions’ are specified. Each position offers a unique directional flow path.
What functionality should the directional control valve have?
How fast do you need the valve to shift? (Response Time)
Valves can be either pilot operated or direct-acting:
How much flow is needed to support the work downstream?
Flow will be determined through a calculation that will consider aspects of the application downstream of the cylinder, including plumbing, cylinder quantity, bore size, and application speed. Once the valve flow requirements are determined, the size of the pneumatic valve can be determined by comparing it to the flow available through a particular valve at the required pressure.
What are the power and connection requirements?
Pneumatic valves will work under various power conditions. 24 VDC is the most common voltage selected. Connecting that power to the valve also includes options such as DIN connectors, hard wiring, or Molex®-type connectors.
Are there any special valve specifications or optional features needed? (Manual override, port orientation, or multiple valves in a manifold, etc.)
Answering these questions will help you determine which kind of valve you are looking for. If you need additional support, please contact your local All World Machinery Supply representative or send us an email!
AWM is your one stop shop for everything machine tool.
Whether its an O-ring to the most complicated of parts, we always strive to find a solution to meet your needs.